Water filter Iron Remover

Description

---

Product Details:

Type : Iron remover

Category : Water filter Iron remover

Company : TATA

Details : Water filter iron remover Materials: 1. **Filter Housing**: To contain all filter materials. 2. **Gravel**: For the bottom layer to ensure water flow. 3. **Sand**: Fine and coarse sand for different layers to trap particles. 4. **Activated Carbon**: To remove impurities and improve taste. 5. **Zeolite**: A natural mineral that effectively removes iron and manganese. 6. **Manganese Dioxide**: Helps oxidize iron and manganese, making them easier to filter out. 7. **Greensand**: Often used for iron removal as it contains glauconite, which helps in the filtration process. 8. **Filter Cloth**: To prevent fine particles from escaping. 9. **Aeration Unit**: Optional, but helps in oxidizing iron before filtration. 10. **PVC Pipes and Fittings**: For the inlet and outlet of water. ### Steps to Assemble: 1. **Prepare the Housing**: Clean the filter housing thoroughly. 2. **Bottom Layer**: Add a layer of gravel at the bottom to facilitate drainage. 3. **Sand Layers**: Add coarse sand, followed by fine sand. Each layer should be a few inches thick. 4. **Activated Carbon**: Add a layer of activated carbon to absorb impurities and odors. 5. **Zeolite Layer**: Add a layer of zeolite for removing iron and manganese. 6. **Manganese Dioxide Layer**: Add a layer of manganese dioxide for additional iron oxidation. 7. **Greensand Layer**: Add a layer of greensand for enhanced iron removal. 8. **Filter Cloth**: Place a filter cloth on top of the greensand to prevent particles from escaping. 9. **Aeration Unit (Optional)**: Install an aeration unit before the water enters the filter to oxidize iron. 10. **PVC Pipes and Fittings**: Connect the inlet and outlet pipes to the filter housing. ### Usage: 1. **Water Inlet**: Connect the water source to the inlet pipe. 2. **Water Flow**: Allow water to pass through each layer sequentially. 3. **Filtered Water Outlet**: Collect filtered water from the outlet pipe. ### Maintenance: - **Backwashing**: Regularly backwash the filter to remove trapped particles and prevent clogging. - **Media Replacement**: Replace filter media like activated carbon, greensand, and zeolite as needed. ### Notes: - Adjust the thickness of each layer based on the iron content in your water. - Ensure proper sealing of the filter housing to prevent leakage. - Test the filtered water periodically to ensure effective iron removal.